How to Install and Use Wavecom GSM Modem M1306B Drivers 3.8
If you are looking for a reliable and easy-to-use GSM modem for your wireless communication needs, you might want to consider the Wavecom GSM Modem M1306B. This modem is a dual-band 900/1800 MHz device that supports voice, data, fax, SMS and GPRS connectivity. It also has an Open AT capability that allows you to embed your own applications into the modem.
wavecomgsmmodemm1306bdrivers38
However, before you can use the Wavecom GSM Modem M1306B, you need to install the drivers for it on your computer. The drivers are software programs that enable your computer to communicate with the modem via a serial port. In this article, we will show you how to download and install the Wavecom GSM Modem M1306B Drivers 3.8 on your Windows XP system.
Step 1: Download the drivers
The first step is to download the drivers for the Wavecom GSM Modem M1306B from the official website of Sierra Wireless, the company that acquired Wavecom in 2009. You can find the drivers in the Legacy FX/FXT series section of the IoT Gateways page. Alternatively, you can use this link to access the drivers directly.
The drivers are contained in a ZIP file called USB driver installation disk.zip. You need to extract the contents of this file to a folder on your computer. You can use any ZIP extraction software such as WinZip or 7-Zip for this purpose.
Step 2: Connect the modem
The next step is to connect the Wavecom GSM Modem M1306B to your computer using a serial cable. The modem has a 15-pin sub-D connector for voice and RS-232 serial interface. You need to plug one end of the cable into this connector and the other end into a serial port on your computer. If your computer does not have a serial port, you can use a USB-to-serial adapter instead.
After connecting the modem, you need to insert a SIM card into the internal SIM tray of the modem. The SIM card should be compatible with the GSM network that you want to use. You also need to connect an antenna to the modem and plug in a power supply that can provide 5.5 to 32V DC voltage.
Step 3: Install the drivers
The final step is to install the drivers for the Wavecom GSM Modem M1306B on your computer. To do this, you need to follow these steps:
Go to Start > Control Panel > System > Hardware > Device Manager.
Look for a device called Unknown Device under Ports (COM & LPT).
Right-click on this device and select Update Driver.
Select No, not this time when asked if Windows can connect to Windows Update.
Select Install from a list or specific location (Advanced).
Select Search for the best driver in these locations and check Include this location in the search.
Browse to the folder where you extracted the drivers and click OK.
Click Next and follow the instructions on the screen.
Click Finish when the installation is complete.
You should now see a device called Wavecom Fastrack M1306B under Ports (COM & LPT) in Device Manager. This means that the drivers have been successfully installed and your modem is ready to use.
Step 4: Test the modem
After installing the drivers, you can test the functionality of the Wavecom GSM Modem M1306B by using a terminal software such as HyperTerminal or PuTTY. To do this, you need to follow these steps:
Open the terminal software and select the COM port that corresponds to the modem.
Set the baud rate to 115200, data bits to 8, parity to none, stop bits to 1 and flow control to none.
Click Connect or Open to establish a connection with the modem.
Type AT and press Enter. You should see OK as a response from the modem.
Type AT+CGMI and press Enter. You should see WAVECOM MODEM as a response from the modem.
Type AT+CGMM and press Enter. You should see MULTIBAND 900E 1800 as a response from the modem.
Type AT+CGMR and press Enter. You should see 657_09gm.Q2406B 1954500 041604 18:43 as a response from the modem.
If you see these responses, it means that your modem is working properly and you can use it for your wireless communication needs.
Step 5: Use the modem
Now that you have installed and tested the Wavecom GSM Modem M1306B, you can use it for various purposes such as sending and receiving SMS, making and receiving voice calls, sending and receiving faxes, accessing the internet via GPRS and running your own embedded applications. To do this, you need to use a software that can communicate with the modem via AT commands or Open AT APIs. Some examples of such software are:
Auron SMS Server: A Windows-based software that enables you to send, receive and process SMS and e-mail messages. It supports GSM, HTTP, SMPP, SMTP and POP3 protocols. It also has a framework for creating custom scenarios where one/two-way SMS is required.
Wavecom WIPSoft: A software that provides TCP/IP connectivity over GPRS for Wavecom modems. It supports UDP/TCP sockets, POP3/SMTP/FTP clients and HTTP/HTTPS servers. It also has a web interface for configuration and monitoring.
Wavecom Open AT: A software development kit that allows you to create your own applications that run inside the Wavecom modems. It supports C/C++, Lua, Java and .NET languages. It also has a set of libraries and tools for developing, debugging and testing your applications.
You can find more information about these software on their respective websites or documentation.
Step 6: Troubleshoot the modem
Sometimes, you may encounter some problems or errors when using the Wavecom GSM Modem M1306B. Here are some common issues and their possible solutions:
If you see ERROR as a response from the modem when typing AT commands, it means that the modem does not recognize or support the command. You should check the syntax and spelling of the command and make sure that it is valid for the modem. You can also refer to the AT command manual for more information.
If you see +CME ERROR: xxx as a response from the modem, it means that there is a GSM network related error. The xxx is a numerical code that indicates the type of error. You should check the signal strength and quality of the network and make sure that the SIM card is valid and activated. You can also refer to the GSM error codes for more information.
If you see +CMS ERROR: xxx as a response from the modem, it means that there is a SMS service related error. The xxx is a numerical code that indicates the type of error. You should check the SMS center number and format of the message and make sure that the service is available and supported by the network. You can also refer to the SMS error codes for more information.
If you see NO CARRIER as a response from the modem, it means that there is no connection established with the remote party. This can happen when making or receiving voice calls, data calls or faxes. You should check the phone number and settings of the modem and make sure that the line is not busy or out of service.
If you see NO DIALTONE as a response from the modem, it means that there is no dial tone detected on the line. This can happen when making voice calls or faxes. You should check the connection and wiring of the modem and make sure that there is no interference or noise on the line.
If you still cannot resolve the problem, you can contact Sierra Wireless technical support for further assistance.
Step 7: Update the drivers
It is recommended that you update the drivers for the Wavecom GSM Modem M1306B regularly to ensure that it works with the latest firmware and software versions. To do this, you need to follow these steps:
Download the latest drivers for the Wavecom GSM Modem M1306B from the Sierra Wireless website. You can find them in the Legacy FX/FXT series section of the IoT Gateways page.
Extract the contents of the ZIP file to a folder on your computer.
Disconnect the modem from your computer and remove the SIM card and antenna.
Connect the modem to your computer using a USB cable. The modem has a mini-USB port on its side for this purpose.
Run the setup.exe file from the folder where you extracted the drivers.
Follow the instructions on the screen to install the drivers.
Reconnect the SIM card and antenna to the modem and plug in the power supply.
You have now updated the drivers for the Wavecom GSM Modem M1306B and you can use it with the latest features and enhancements.
Step 8: Uninstall the drivers
If you want to uninstall the drivers for the Wavecom GSM Modem M1306B from your computer, you need to follow these steps:
Disconnect the modem from your computer and remove the SIM card and antenna.
Go to Start > Control Panel > Add or Remove Programs.
Look for Wavecom Fastrack M1306B Drivers in the list of programs and click Remove.
Follow the instructions on the screen to uninstall the drivers.
Delete the folder where you extracted the drivers if you want to remove them completely.
You have now uninstalled the drivers for the Wavecom GSM Modem M1306B and you can use another modem or device instead.
Conclusion
In this article, we have shown you how to install and use the Wavecom GSM Modem M1306B Drivers 3.8 on your Windows XP system. We have also covered some basic features and functions of the modem, such as sending and receiving SMS, making and receiving voice calls, sending and receiving faxes, accessing the internet via GPRS and running your own embedded applications. We have also provided some tips and solutions for troubleshooting the modem in case of any problems or errors.
The Wavecom GSM